100 SYS ROUND POST & RAIL SYSTEM FOR BOTH INTERIOR AND EXTERIOR USES.
AVAILABLE WITH 1/4", 3/8" & 1/2" GLASS.
FEATURES
All Aluminum Construction – No Steel To Rust
70 % Kynar – Bone White – Baked Fluoropolymer Resin Paint is Standard / Custom Colors, Powder Coating and Anodizing are also available
Works perfect on radiused and odd angled walls – special shape of extrusions fit anywhere on the post, to make a custom look with a standard product
Matching self-closing, self-latching gates are available
EXTERIOR GLASS RAIL
When a top rail is used (required by code for stair and guardrails), the glass is held down 2” from the top rail and up to 4” above the finished floor. All exposed edges are polished.
MAIN INSTALLATION METHOD
Welded 4” X 4” X ¼” aluminum square bottom plates with 4-1/2” holes for lags. Bottom plates can be welded at an angle for stairway installations. Finished cover plates are available.
Heavy duty floor flanges, lagged to the surface. No finish plates required.
Recessed into 3” holes in either open cinder block cells, or core drilled into existing walls.
Lagged to the side of walls with welded plates.
Flanges mounted to facia boards.
Used as a windbreak or property line fence, a top rail is not required. The bottom edge of the glass can either be held up from its mounting surface or set into a bottom channel. The channel will match that used on the posts
GRA100 T adapter for top rails
In the glass industry since 1922 and serving Southern California since 1961
26051 Avenida Aeropuerto, San Juan Capistrano, CA 92675
